Connections And Wiring; Connecting And Removing The Reader/Writer Power Cable And Ethernet Cable - Omron V680S-HMD64-PNT User Manual

Section 4
Installation and Connections

Connections and Wiring

Connecting and Removing the Reader/Writer Power Cable and Ethernet Cable

 Connecting Method
1.
Hold onto the connector on the Power Cable and
insert it into the power connector on the Reader/
Writer.
Do not apply more than 30 N of force to the
connector on the Reader/Writer.
2.
Turn the connector on the Power Cable
clockwise to lock it in place.
Recommended tightening torque: 0.39 to 0.49 N·m
 Contact arrangement of the Reader/
Writer's power connector
Pin No. Name
1
2 CONT
3
4
Pin No. Name
Refer to Operation Mode in Section 6 Functions for information on the RUN mode, and Safe mode.
p.94
 Contact arrangement and wiring diagram of the recommended cable (Model
XS5F-D42-80-F)
Contact arrangement
1
4
Read and understand the power cable manual before attempting to connect the power cable.
RFID System
82
User's Manual
(PROFINET)
Description
24P +24 V
Control signal (operating mode signal)
* Run Mode: Connect to +24 V and then start
the Reader/Writer.
Safe Mode: Connect to 0 V and then start
the Reader/Writer.
24N 0 V
- -
Description
Wiring cable (Four-core type)
Pin No.
2
1
2
3
3
4
Power supply connector on cable
1 4
Power supply connector on cable
2 3
I/O
---
IN
---
---
I/O
wire color
Brown
White
Blue
Black
Reader/Writer power
supply connector
(M12 A-Coding, female)