V680S Commands - Omron V680S-HMD64-PNT User Manual

V680S Commands

 Command Codes
The following table lists the command codes that you can specify for execution by the Reader/Writer.
Set these codes in the Command Code field in the command area.
Classification
RF Tag communications
Reader/Writer settings
Reader/Writer information
acquisition
Reader/Writer operation control
 Error Codes
The following tables list the error codes that indicate the response results from the Reader/Writer.
These codes are set in the Error Code field in the response area.
If an error response is returned (i.e., an error code other than 0000 hex), a record is stored in the
command error log in the Reader/Writer. Records are not stored for errors for which responses are not
returned to the host device. Reader/Writer operating errors and system errors are recorded in the
system error log in the Reader/Writer.
 Normal Code
Error code name
Normal end
 Interrupted Processing
Error code name
Communications
canceled
Communications
aborted
Command code
0001 hex READ ID
0002 hex READ DATA
0003 hex WRITE DATA
0004 hex LOCK
0005 hex DATA FILL
0006 hex RF TAG OVERWRITE COUNT CONTROL
0007 hex RESTORE DATA
0008 hex COPY DATA
INITIALIZE
1000 hex
SET RF TAG COMMUNICATIONS
1001 hex
GET RF TAG COMMUNICATIONS SETTINGS
1002 hex
1003 hex SET MULTI-READER/WRITER OPERATION
1004 hex GET MULTI-READER/WRITER SETTINGS
2000 hex GET MODEL INFORMATION
2001 hex GET FIRMWARE VERSION
2002 hex GET OPERATING TIME
2003 hex MEASURE NOISE
2004 hex GET COMMAND ERROR LOG
2005 hex GET RESTORE INFORMATION
2006 hex GET MULTI-READER/WRITER STATUS
3000 hex RESET
Error code
0000 hex Processing ended normally.
Error code
Processing was canceled when an OFF EXE signal was received before an RF Tag
0001 hex was detected. (The contents of the RF Tag was not changed, even for a WRITE
DATA command.)
Processing was canceled when an OFF EXE signal was received during
0002 hex communications with an RF Tag. (For a WRITE DATA command, the contents of
the RF Tag may have been changed.)
Host Communications Specifications
Command name
Description
Description
Section 7
Reference
p.158
p.159
p.160
p.161
p.162
p.163
p.164
p.165
p.167
p.168
p.169
p.170
p.172
p.174
p.175
p.176
p.177
p.178
p.180
p.182
p.183
RFID System
155
User's Manual
(PROFINET)