Chassis Components And Descriptions; T320 Chassis Description - Juniper Core Router T Series Hardware Manual
Hide thumbs
Also See for Core Router T Series:
- Monitoring and troubleshooting manual (812 pages) ,
- Handling instructions manual (12 pages)
Table of Contents
Advertisement
CHAPTER 3
Chassis Components and Descriptions
T320 Chassis Description
Copyright © 2018, Juniper Networks, Inc.
T320 Chassis Description on page 13
T320 Midplane Description on page 15
T320 Alarm Relay Contacts on page 18
T320 Cable Management System Description on page 18
T320 SONET Clock Generator (SCG) Description on page 19
T320 SCG LEDs on page 20
T320 Craft Interface Description on page 20
T320 Craft Interface Host Subsystem LEDs on page 23
T320 Craft Interface FPC LEDs on page 23
T320 Craft Interface SIB LEDs on page 24
The T320 Core Router chassis is a rigid sheet metal structure that houses all the other
router components (see
Figure 4 on page 14
measures 25.13 in. (63.82 cm) high, 31.4 in. (79.8 cm) deep, and 17.43 in. (44.3 cm) wide.
The chassis can be installed into many types of racks or cabinets.
The chassis includes the following features (see
Figure 5 on page
15):
A pairs of center-mounting metal brackets for center-mounting the chassis in an
open-frame rack.
Front-mounting flanges for front-mounting in an open-frame rack, or for mounting in
a four-post rack or cabinet.
Handles on each side to facilitate positioning the router in the rack. Do not use the
handles to lift the router.
Two electrostatic discharge (ESD) points (banana plug receptacles), one front and
one rear.
and
Figure 5 on page
15). The chassis
Figure 4 on page 14
and
13
Advertisement
Table of Contents
Troubleshooting
Need help?
Do you have a question about the Core Router T Series and is the answer not in the manual?
Questions and answers