Figure 50: Attaching The Installation Handle - Juniper Core Router T Series Hardware Manual

T320 Core Router Hardware Guide
140

Figure 50: Attaching the Installation Handle

Position the router in front of the rack or cabinet, centering it in front of the mounting
3.
shelves. Use a pallet jack if one is available.
CAUTION: Do not lift the router using the craft interface, installation
handle, or the handles on the sides of the chassis. Use these handles only
to help position the router.
With two people in the front and two people in the back, hold onto the bottom of the
4.
chassis and carefully lift it onto the mounting shelves.
WARNING: To prevent injury, keep your back straight and lift with your
legs, not your back. Avoid twisting your body as you lift. Balance the load
evenly and be sure that your footing is solid.
With one person pulling on the installation handle from the rear of the rack or cabinet
5.
while two people push on the front-mounting flanges, slide the router onto the
Copyright © 2018, Juniper Networks, Inc.