Replacing A Dimm Module In T320 Routing Engines; Removing A T320 Dimm Module; Figure 86: Installing A Pc Card - Juniper Core Router T Series Hardware Manual
Hide thumbs
Also See for Core Router T Series:
- Monitoring and troubleshooting manual (812 pages) ,
- Handling instructions manual (12 pages)
Table of Contents
Advertisement
See Also
Related
Documentation
Replacing a DIMM Module in T320 Routing Engines
Copyright © 2018, Juniper Networks, Inc.
Press the card firmly all the way into the slot.
4.
Reinstall the Routing Engine cover and tighten the screws on the corners of the cover
5.
to secure it to the chassis.
Figure 86: Installing a PC Card
T320 RE-600 Description on page 34
T320 RE-1600 Description on page 36
Maintaining the T320 Host Subsystem on page 275
Preventing Electrostatic Discharge Damage to a T320 Router on page 330
T320 RE-600 Description on page 34
T320 RE-1600 Description on page 36
Maintaining the T320 Host Subsystem on page 275
Preventing Electrostatic Discharge Damage to a T320 Router on page 330
1.
Removing a T320 DIMM Module on page 213
Installing a T320 DIMM Module on page 214
2.
Removing a T320 DIMM Module
The DIMM modules are located on the top of the Routing Engine. To remove a DIMM
module:
Chapter 26: Replacing Host Subsystem Components
213
Advertisement
Table of Contents
Troubleshooting
Need help?
Do you have a question about the Core Router T Series and is the answer not in the manual?
Questions and answers