Juniper Core Router T Series Hardware Manual page 390

T320 Core Router Hardware Guide
Related
Documentation
362
WARNING: The intrabuilding ports of the equipment or subassembly are
suitable for connection to intrabuilding or unexposed wiring or cabling only.
The intrabuilding ports of the equipment or subassembly MUST NOT be
metallically connected to interfaces that connect to the Outside Plant (OSP)
or its wiring. These interfaces are designed for use as intrabuilding interfaces
only (Type 2 or Type 4 ports as described in GR-1089-CORE, Issue 4) and
require isolation from the exposed OSP cabling. The addition of primary
protectors is not sufficient protection in order to connect these interfaces
metallically to OSP wiring.
General Electrical Safety Guidelines and Electrical Codes for Juniper Networks Devices
Copyright © 2018, Juniper Networks, Inc.