Extended operation: setting up the Central Control
7.6.3 Setting the contrast
User manual Wilo-Geniax Central Control
2. Press [Menu] and navigate in the »Unit« selection menu via:
»Settings« »Unit«
➥ The display shows the »Unit« selection menu.
3. In order to change the brightness, select the »Brightness«
menu point and press [OK].
➥ The display shows the »Brightness« input menu.
4. Use [] and [] to set the desired level of brightness.
5. Apply your input with [OK] or use [back] without applying
the input to return to the »Unit« selection menu.
1. Press [Room] in case the room main display is still not dis-
played.
➥ The display shows the room main display.
2. Press [Menu] and navigate in the »Unit« selection menu via:
»Settings« »Unit«
➥ The display shows the »Unit« selection menu.
3. In order to change the contrast, select the »Contrast«
menu point and press [OK].
➥ The display shows the »Contrast« input menu.
4. Use [] and [] to set the desired level of contrast.
5. Apply your input with [OK] or use [back] without applying
the input to return to the »Unit« selection menu.
English
97
Need help?
Do you have a question about the Geniax Central Control and is the answer not in the manual?