Ending Intervention (Warmer/Colder) For A Room Group - Wilo Geniax Central Control User Manual

Daily operation and quick settings

5.2.6 Ending intervention (warmer/colder) for a room group

User manual Wilo-Geniax Central Control
➥ The display shows the »Central control« selection
menu.
4. Use the [] and [] buttons to select the »Central active
interventions« menu point and press [OK] or [].
➥ The display shows the »Central active interventions«
selection menu.
5. Use the [] and [] buttons to select the »Warmer/
colder« menu point and press [OK] or [].
➥ The display shows the »Warmer/colder (central)«
selection menu.
6. Use the [] and [] buttons to select the »Edit« menu
point and press [OK] or [].
➥ The display shows the »Rel. temperature change« input
menu.
7. Continue with step 6 in section [5.2.4 Intervention
(warmer/colder) for a room group, page 34] .
You can use this function to end the "Intervention" room
mode for a room group early. You can only perform this
function if the "Intervention" room mode is active and the
symbol is shown in the central main display.
1. Press the [Central] function button in case the central
main display is still not displayed.
➥ The display shows the central main display. The central
active "Intervention" room mode is indicated by the
symbol .
2. Press the [Menu] function button.
English
37