Editing The Week Profile - Wilo Geniax Central Control User Manual

English

7.2 Editing the week profile

78
2. Press [Menu] and navigate in the »Central interventions«
selection menu via:
»Central control«  »Central interventions«
➥ The display shows the »Central interventions« selec-
tion menu.
3. Use [] and [] to select the »Exclude rooms« menu item
and press [OK].
➥ The display shows the »Exclude rooms« selection menu
with the names of the rooms belonging to the room
group of the Central Control.
4. In order to include or exclude one or more rooms for the
central control, use [] and [] to select the respective
room and press [OK].
➥ The menu items of the rooms which are excluded from
the central control are ticked.
When a Central Control or a room is controlled
centrally, local room time profiles can still be acti-
vated. However, the centrally activated room
group time profile will become automatically
active again after completion of the room time
profile.
Up to three different time areas can be created for each
weekday in the week profile. You can adapt the week pro-
file to suit your needs by changing existing time areas or
creating new time areas.
During installation, the week profile is individually
adapted to your heating habits and the spatial sit-
uation. It is only necessary to re-adapt it if the cre-
ated weekly routine no longer corresponds to you
habits.
Extended operation: setting up the Central Control
WILO SE 04/2011