Displaying Unit Information; Displaying Contact Person - Wilo Geniax Central Control User Manual

Calling up information

6.4 Displaying unit information

6.5 Displaying contact person

User manual Wilo-Geniax Central Control
You can use this function to display the following unit
information:
•
The name of the room where the Central Control is
installed
•
The room group in to which the room has been assigned
•
The serial number of your Central Control
1. Press the [Room] function button in case the room main
display is still not displayed.
➥ The display shows the room main display.
2. Press the [Menu] function button.
➥ The display shows the »Menu« selection menu.
3. Select the »Information« menu point and press [OK].
➥ The display shows the »Information« selection menu.
4. Select the »Unit« menu point and press [OK].
➥ The display shows the »Unit information« display
menu.
5. Return with [back] to the »Information« selection menu or
wait until the display automatically shows the main dis-
play again.
You can use this function to show the contact data of the
specialist who installed your heating system to receive
quick assistance in case there are problems.
English
73