Wilo Geniax Central Control User Manual page 30

English
Week profile not activated?
Activate week profile?
28
5. Use the [] and [] buttons to select the »With home week
prof.« menu point and press [OK] or [].
If the central room group week profile is already
active, then the respective menu item is ticked off.
➥ The display shows the »Edit week profile« input menu.
You can change the week profile. See step 3,
section 7.2.2 Editing the central week profile
[page 82].
6. In order not to activate the week profile, press the [Cancel]
function button.
➥ The display shows the »Central interventions« selec-
tion menu.
7. Cancel your selection with [Close] or wait until the display
shows the main display again.
➥ The display shows the central main display with the
overview of the active time profiles for all the room
user interfaces included in the central control. The pre-
set time profile remains active.
8. In order to activate the week profile, press the [Activate]
function button.
➥ The display shows the »Save?« dialogue.
9. In order to save the week profile, press [Yes] or return to
the »Edit week profile« selection menu with [back] with-
out saving.
➥ The display shows the central main display with the
overview of the active time profiles for all the room
user interfaces included in the central control. The
symbol indicates the central active "Week profile"
room mode. The settings stored in the central week
profile are used.
Daily operation and quick settings
WILO SE 04/2011