Extended Operation: Setting Up The Central Control; Configuring Central Control Functions; Configuring The Central Control For The Central Control - Wilo Geniax Central Control User Manual

English
7

Extended operation: setting up the Central Control

7.1 Configuring central control functions

7.1.1 Configuring the Central Control for the central control

76
Your Central Control has already been preset at the fac-
tory or, as the case may be, by a technician during the
installation to meet your individual needs and heating
habits.
Among the settings are:
•
Configuration as independent or centrally controlled room
user interface
•
Week profile specifications (time profiles for rooms and
room groups
•
Standard values for temperature control
•
Current date and time which control the time profiles
•
Display contrast and brightness of the Central Control
With the Central Control, several Geniax room user inter-
faces or, as the case may be, rooms which are included in
the central control can be controlled from one Central
Control.
If individual rooms are to be excluded from the central
control, the corresponding Geniax room user interface
(Comfort Control/Basic Control) has to be excluded from
the central control. Since the Central Control is also the
room user interface for the room where it is installed, it
can also exclude itself from the central control.
With this function, you can configure the room functions
of the Central Control for central control.
1. Press [Room] in case the room main display is still not dis-
played.
➥ The display shows the room main display.
2. Press [Menu].
Extended operation: setting up the Central Control
WILO SE 04/2011