Setting Day/Night Area For A Room Group - Wilo Geniax Central Control User Manual

Extended operation: setting up the Central Control
Change day period?
Change night period?
7.4.2

Setting day/night area for a room group

User manual Wilo-Geniax Central Control
3. In order to change the day period, select »Day ends at«
menu point and press [OK].
➥ The display shows the »Day ends at ...« input menu.
4. Set the time at which the day ends with the [] and []
buttons.
5. Apply your input with [OK] or use [back] without applying
the input to return to the »Day / night area« selection
menu.
6. In order to change the night period, select »Night ends at«
menu point and press [OK].
➥ The display shows the »Night ends at ...« input menu.
7. Set the time at which the night ends with the [] and []
buttons.
8. Apply your input with [OK] or use [back] without applying
the input to return to the »Day / night area« selection
menu.
You can use this function to define the day/night area for
a room group.
1. Press [Central] in case the central main display is still not
displayed.
➥ The display shows the central main display.
2. Press [Menu] and navigate to the »Day / night area« selec-
tion menu via:
»Central control«  »Central settings«  »Name of the
room group«  »Day / night area«
In order to do the setting not for the entire room
group but rather for another Geniax room user
interface of the room group, select the respective
room name in the »Central settings« menu instead
of the room group name.
English
91