Ending Intervention For The Room - Wilo Geniax Central Control User Manual

Daily operation and quick settings

5.2.3 Ending intervention for the room

User manual Wilo-Geniax Central Control
➥ The display shows the »Intervention (room)« selection
menu.
If no room time profile but rather a central time
profile is active, the respective central room mode
is edited (room group).
4. Use the [] and [] buttons to select the »Edit« menu
point and press [OK] or [].
➥ The display shows the »Intervention« input menu.
5. Continue with step 3 in section 5.2.1 Intervention for the
room [page 30] .
You can use this function to end the "Intervention" room
mode for the room early. You can only carry out this func-
tion if the "Intervention" room mode is active and the
symbol is shown in the room main display.
1. Press the [Room] function button in case the room main
display is still not displayed.
➥ The display shows the room main display. The "Inter-
vention" room mode is indicated by the symbol
2. Press the [Menu] function button.
➥ The display shows the »Menu« selection menu.
3. Use the [] and [] buttons to select the »Currently
active: Intervention« menu point and press [OK] or [].
English
.
33