Adjusting The Device; Selecting Start Screen; Setting The Brightness - Wilo Geniax Central Control User Manual

English

7.6 Adjusting the device

7.6.1 Selecting start screen

7.6.2 Setting the brightness

96
➥ The display shows the central main display with the
overview of the active time profiles for all the room
user interfaces included in the central control. The
central active "Week profile" room mode is indicated
by the symbol
You can set the brightness and contrast of the Central
Control Display in order to improve the legibility of the
display. Besides this, you can select whether the main dis-
play should show the room or the room group as start
screen.
1. Press [Room] in case the room main display is still not dis-
played.
➥ The display shows the room main display.
2. Press [Menu] and navigate in the »Unit« selection menu via:
»Settings«  »Unit«
➥ The display shows the »Unit« selection menu.
3. In order to select the start screen, select the »Start
screen« menu point and press [OK].
➥ The display shows the »Start screen« selection menu.
4. Use [] and [] to select the entry »This room« or »This
room group«, depending on whether you want the room
main display or the central main display as the start
screen.
5. Apply your selection with [OK] or use [Close] to return to
the main display without applying the entry.
1. Press [Room] in case the room main display is still not dis-
played.
➥ The display shows the room main display.
Extended operation: setting up the Central Control
.
WILO SE 04/2011