Wilo Geniax Central Control User Manual page 54

English
52
1. Press the [Central] function button in case the central
main display is still not displayed.
➥ The display shows the central main display. The central
active "Present" room mode is indicated by the symbol
.
2. Press the [Menu] function button.
➥ The display shows the »Menu« selection menu.
3. Use the [] and [] buttons to select the »Central con-
trol« menu point and press [OK] or [].
➥ The display shows the »Central control« selection
menu.
4. Use the [] and [] buttons to select the »Central active
interventions« menu point and press [OK] or [].
➥ The display shows the »Central active interventions«
selection menu.
5. Use the [] and [] buttons to select the »Present«
menu point and press [OK] or [].
➥ The display shows the »Present (central)« selection
menu.
6. Use the [] and [] buttons to select the »End« menu
point and press [OK] or [].
➥ The display shows the central main display with the
overview of the active time profiles for all the room
user interfaces included in the central control. The
"Present" room mode has been ended and the preset
time profile is active again.
Daily operation and quick settings
WILO SE 04/2011