Wilo Geniax Central Control User Manual page 64

English
62
➥ The display shows the »Central control« selection
menu.
4. Use the [] and [] buttons to select the »Central inter-
ventions« menu point and press [OK] or [].
➥ The display shows the »Central interventions« selec-
tion menu.
5. Use the [] and [] buttons to select the »Absent until
...« menu point and press [OK] or [].
If an absence time profile is already active, then the
respective menu item is ticked off. In this case, the
time profile can be edited [5.4.7 Editing absence
for a room group, page 65], step 6.
➥ The display shows the »Absent until ...« input menu.
6. Use the [] and [] buttons to select whether you want
to set the day, month or year of the final date of you pres-
ence:
[] for selection to the left
[] for selection to the right
7. Select the desired final date of your absence with the []
and [] buttons:
[] for a later final date
[] for a earlier final date
8. Apply your input with [OK].
➥ The display shows the »Absent until ...« input menu.
9. Use the [] and [] buttons to select the desired time for
your return.
10. Apply your input with [OK].
➥ The display shows the »Absent« selection menu with
the date and time of your return. The »With room set-
tings« menu item is ticked; the room time profile set-
tings stored in the individual room user interfaces are
used.
Daily operation and quick settings
WILO SE 04/2011