Setting Temperature Specifications For A Room Group - Wilo Geniax Central Control User Manual

English
Change minimum

7.3.2 Setting temperature specifications for a room group

88
14. Apply your input with [OK] or use [back] without applying
15. In order to change the minimum temperature, select the
temperature?
16. Use [] and [] to enter the desired temperature.
17. Apply your input with [OK] or use [back] without applying
1. Press [Central] in case the central main display is still not
2. Press [Menu] and navigate to the »Temperature specifica-
Extended operation: setting up the Central Control
the input to return to the »Temperature specifications«
selection menu.
»Minimum« menu point and press [OK].
➥ The display shows the »Minimum« input menu.
The minimum temperature determines the mini-
mum room target temperature that can be set. The
temperature cannot fall below the value entered
here.
the input to return to the »Temperature specifications«
selection menu.
You can use this function to set the temperature specifi-
cations for a room group.
displayed.
➥ The display shows the central main display.
tions« selection menu via:
»Central control«  »Central settings«  »Name of the
room group«  »Temperature specifications«
In order to do the setting not for the entire room
group but rather for another Geniax room user
interface of the room group, select the respective
room name in the »Central settings« menu instead
of the room group name.
➥ The display shows the »Temperature specifications«
selection menu.
WILO SE 04/2011