Configuring Geniax Room User Interfaces Of A Room Group For Central Control - Wilo Geniax Central Control User Manual

Extended operation: setting up the Central Control
7.1.2 Configuring Geniax room user interfaces of a room group for central
control
User manual Wilo-Geniax Central Control
➥ The display shows the »Menu« selection menu. The
third menu item from the top shows whether or not the
room is currently included in the central control.
3. If the room is centrally controlled by a Central Control, the
third menu point will be »Exclude room from centr.
contr.«. In order to remove the Central Control/room from
the central control, select the »Exclude room from centr.
contr.« menu point and press [OK].
➥ The display shows the »Menu« selection menu. The
third menu point in now »Include room for centr.
contr.«. The Central Control/room is removed from the
central control.
4. If the room is not centrally controlled, the third menu
point is »Include room for centr. contr.«. In order to
include the Central Control/room in the central control,
select the »Include room for centr. contr.« menu point
and press [OK].
➥ The display shows the »Menu« selection menu. The
third menu point in now »Exclude room from centr.
contr.«. The Central Control/room is centrally control-
led.
When a Central Control or a room is controlled
centrally, local room time profiles can still be acti-
vated. However, the centrally activated room
group time profile will become automatically
active again after completion of the room time
profile.
If a central time profile is active, then the symbol
will be shown in addition in front of the symbol
of the corresponding time profile.
With this function, you can configure the other rooms in a
room group functions for central control.
1. Press [Central] in case the central main display is still not
displayed.
➥ The display shows the central main display.
English
77