Wilo Geniax Central Control User Manual page 37

Daily operation and quick settings
Do not apply values?
User manual Wilo-Geniax Central Control
➥ The display shows the »Central control« selection
menu.
4. Use the [] and [] buttons to select the »Central inter-
ventions« menu point and press [OK] or [].
➥ The display shows the »Central interventions« selec-
tion menu.
5. Use the [] and [] buttons to select the »Warmer/
colder« menu point and press [OK] or [].
If an intervention (warmer/colder) is already
active, then the respective menu item is ticked off.
In this case, the time profile can be edited
[5.2.5 Editing the intervention (warmer/colder) for
a room group, page 36], step 6.
➥ The display shows the »Rel. temperature change« input
menu.
6. Use the [] and [] buttons to select the time up to when
the intervention should be active:
[] for a earlier time
[] for a later time
If you lightly tap on the buttons, the time will be
adjusted in 1-minute steps. If you press and hold
down the buttons, the time will be adjusted in 15-
minute or hour steps.
7. Select the desired temperature change with the [] and
[] buttons:
[] to raise the temperature by the displayed value
[] to lower the temperature by the displayed value
8. In case you want to retain the original values and do not
want to apply the changed values, press the [back] func-
tion button or wait until the display shows the main dis-
play again.
➥ The display changes back to the »Central interven-
tions« selection menu or to the central main display.
The active time profile remains active.
Start with Step 2. to input again.
English
35