Editing Presence For The Room - Wilo Geniax Central Control User Manual

Daily operation and quick settings

5.3.3 Editing presence for the room

User manual Wilo-Geniax Central Control
➥ The display shows the room main display with the
room target temperature and the time up to when this
temperature is to be maintained. The symbol
cates the "Present" room mode. At the end of the set
period, the preset time profile is activated again.
You can change the set values [5.3.3 Editing pres-
ence for the room, page 43] or end the "Present"
room mode early again [5.3.4 Ending presence for
the room, page 44].
The symbol
room.
You can subsequently edit the settings for the presence
time profile of the room with this function. You can only
carry out this change if the "Present" room mode is active
and the symbol
1. Press the [Room] function button in case the room main
display is still not displayed.
➥ The display shows the room main display. The
"Present" room mode is indicated by the symbol
2. Press the [Menu] function button.
➥ The display shows the »Menu« selection menu.
3. Use the [] and [] buttons to select the »Currently
active: Present« menu point and press [OK] or [].
indicates the "heating up" of the
is shown in the room main display.
English
indi-
.
43