Wilo Geniax Central Control User Manual page 50

English
Subsequently change the
Use the individual settings
for every room?
48
7. Select the desired final date of your presence with the []
and [] buttons:
[] for a later final date
[] for a earlier final date
8. Apply your input with [OK].
➥ The display shows the »Present« selection menu with
9. In order to subsequently change the final date, use the
final date? [] and [] buttons to select the »Until:« menu point
and press [OK] or [].
➥ The display shows the »Present until ...« input menu.
10. Follow the instructions in step 6 to step 8.
11. Use the [] and [] buttons to select the »Apply« menu
point and press [OK] or [].
➥ The display shows the central main display with the
the final date of your presence. The »With room set-
tings« menu item is ticked; the local room time profile
settings of the room user interfaces are used.
overview of the active time profiles for all the room
user interfaces included in the central control. The
symbol indicates the central active "Present" room
mode. The local room time profile settings of the room
user interfaces are used.
At the end of the set period, the preset time profile is
activated again.
You can change the set values [5.3.7 Editing pres-
ence for a room group, page 50] or end the
"Present" room mode early again [5.3.8 Ending
presence for a room group, page 51].
Daily operation and quick settings
WILO SE 04/2011