Wilo Geniax Central Control User Manual page 33

Daily operation and quick settings
Do not apply values?
Quick heating-up?
Apply values?
User manual Wilo-Geniax Central Control
3. Select the desired room target temperature with the []
and [] buttons:
[] for a higher temperature, e.g. »17.5°C«,
[] for a lower temperature
If you lightly tap on the buttons, the temperature
will be adjusted in 0.5°C steps. If you press and hold
down the buttons, the temperature will be
adjusted in 1°C steps.
4. Use the [] and [] buttons to select the time up to when
the room target temperature should be maintained:
[] for a earlier time
[] for a later time, e.g. »16:00«.
If you lightly tap on the buttons, the time will be
adjusted in 1-minute steps. If you press and hold
down the buttons, the time will be adjusted in 15-
minute or hour steps.
5. In case you want to retain the original values and do not
want to apply the changed values, press the [Close] func-
tion button.
➥ The display changes back to the room main display.
The active time profile remains active.
Start with Step 2. to input again.
6. In case you want a particularly quick heating up of the
room, press the [Quick] function button.
Pressing the function button again resets the function.
"Quick heating-up" increases energy use of the
heating system.
7. In order to apply the values, press [OK] on the navigation
button.
➥ The display shows the »Apply intervention« selection
menu.
8. Use the [] and [] buttons to select the »Apply« menu
point and press [OK] or [].
English
31