Operational Readiness; Changing Main Display; Navigating In The Selection Menus - Wilo Geniax Central Control User Manual

Overview of the Central Control

3.2.3 Operational readiness

3.2.4 Changing main display

3.2.5 Navigating in the selection menus

Select menu point?
User manual Wilo-Geniax Central Control
In order to make settings at the Central Control, the
device has to be put into operational readiness by press-
ing a button.
•
In order to put the Central Control into operational readi-
ness, press the navigation button or one of the two func-
tion buttons.
➥ The display lights up and settings can be make at the
Central Control.
If no entry occurs within 30 seconds, the device
automatically ends the operational readiness and
switches the display off.
The main display can be switched between the room view
and the room group view via the [Room]/[Central] function
button.
•
In order to change from the room main display to the cen-
tral main display, press the [Central] function button.
•
In order to change from the central main display to the
room main display, press the [Room] function button.
The main menu is called up via the [Menu] function button.
The selected menu item is highlighted with a black selec-
tion bar.
Sub-menu structures of various depths can be found
behind the menu items [12 Menu structure, page 106].
•
In order to select a menu point, press the [] and []
buttons until the selection bar is on the desired entry.
•
In order to change to the selected menu, press the [OK] or
[] button.
English
15