Restoring The Presetting For A Room Group - Wilo Geniax Central Control User Manual

Extended operation: setting up the Central Control

7.5.4 Restoring the presetting for a room group

Restore presetting?
User manual Wilo-Geniax Central Control
➥ The display shows the »View presetting« dialogue.
4. Use [] and [] to select the weekday for which you want
to see the presettings.
5. Return to the »Presetting« selection menu with [back].
You can use this function to restore the factory-saved
week profile for a room group.
1. Press [Central] in case the central main display is still not
displayed.
➥ The display shows the central main display.
2. Press [Menu] and navigate to the »Presetting« selection
menu via:
»Central control«  »Central settings«  »Name of the
room group«  »Presetting«.
In order to restore the setting not for the entire
room group but rather for another Geniax room
user interface of the room group (room week pro-
file), select the respective room name in the »Cen-
tral settings« menu instead of the room group
name.
➥ The display shows the »Presetting« selection menu.
3. Select the »Restore« menu point and press [OK].
➥ The display shows the »Restore« dialogue.
4. In order to restore the presettings, confirm the dialogue
with [Yes], or return (without restoring the presettings) to
the »Presetting« selection menu with [back].
If no input is made, the device automatically jumps
back to the main display without restoring the pre-
settings.
English
95