Ending The Central Week Profile For A Room Group - Wilo Geniax Central Control User Manual

Daily operation and quick settings

5.1.2 Ending the central week profile for a room group

User manual Wilo-Geniax Central Control
You can use this function to end the central active room
mode "Week profile" for a room group. You can only per-
form this function if the "Week profile" room mode is cen-
trally active and the symbol
main display.
1. Press the [Central] function button in case the central
main display is still not displayed.
➥ The display shows the main display. The central active
"Week profile" room mode is indicated by the symbol
.
2. Press the [Menu] function button.
➥ The display shows the »Menu« selection menu.
3. Use the [] and [] buttons to select the »Central con-
trol« menu point and press [OK] or [].
➥ The display shows the »Central control« selection
menu.
4. Use the [] and [] buttons to select the »Central active
interventions« menu point and press [OK] or [].
➥ The display shows the »Central active interventions«
selection menu.
5. Use the [] and [] buttons to select the »Week profile«
menu point and press [OK] or [].
➥ The display shows the »Week profile (central)« selec-
tion menu.
6. Use the [] and [] buttons to select the »End« menu
point and press [OK] or [].
is shown in the central
English
29