Wilo Geniax Central Control User Manual page 13

Table of Contents

Advertisement

Overview of the Central Control
Fig. 2:
Room display elements (display)
Room target temperature [page 11]
Room temperature [page 11]
System status [page 11]
Navigating in the selection menus [page 15]
Room mode
Room target
temperature
Room temperature
Time specification
System status
User manual Wilo-Geniax Central Control
Time specification [page 11]
Changing main display [page 15]
The currently active time profile for the room is shown by
the room mode. The room mode can also be an automat-
ically triggered operating mode (e.g., summer operation)
[4 How does the temperature control work?, page 19].
The room target temperature is the temperature that a
room should have at the selected time in accordance with
the active time profile.
The room temperature is the temperature as is currently
measured in the room. If the room temperature is below
the room target temperature, then the room will be
heated.
The time specification indicates until when the room tar-
get temperature is to be maintained in accordance with
the active time profile.
This symbol displays the current operating status of the
Geniax system (e.g., heating mode, fault). See section
10 Symbols [page 99].
Room mode [page 11]
Current time
English
11

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Geniax Central Control and is the answer not in the manual?

Table of Contents