Table of Contents
Advertisement
Appendix B - Remote Control Operation
Setting high / low Temperatures
Setting "DAYTIME" high temperature.
Default Settings:
TEMP
Press SET to scroll to
Hold SET button until TEMP ashes.
To set
Daytime Temperature:
= increases temperature.
= decreases temperature.
Press
or wait to complete setting.
Setting "NIGHT TIME SETBACK" low temperature.
Default Settings:
T E M P
Press SET to scroll to
Hold SET button until TEMP ashes.
To set
Night Time Temperature:
= increases temperature.
= decreases temperature.
Press
or wait to complete setting.
23 °C/74 °F
TEMP
"--" (OFF)
T E M P
Setting Program Timers
You can program two periods of time between 12 am
and 11:50 pm in each 24-hour cycle.
Programs P1 and P2 must be set in the following order
during a 24-hour cycle:
= Day Time temperature (high) program period
= Night Time temperature (low) program period
Default Settings:
Program 1:
06:00 am
P1
Program 2:
11:50 pm
P2
Press SET to scroll to
TIMER
If
=
P1
P1
programming is cancelled.
To keep replace ON all night, set
11:50 am and
If you want to program only one period,
program
P1
then
and
P2
as
.
P1
Setting P1
time—high temperature.
Hold SET button until
P1
ashes.
To set time:
= hour
= minutes
Press
or wait to complete setting.
Setting P1
time—low temperature.
Hold SET button until
P1
and time ashes.
To set time:
= hour
= minutes
Press
or wait to complete setting.
,
,
and
P1
P1
P2
08:00 am
P1
11:50 pm
P2
.
or
=
,
P2
P2
P2
at 12:00 am.
P1
and
with desired times
P1
with the same time
P2
is displayed and time
is displayed
.
P2
at
39
Advertisement
Table of Contents
