Valor AutoFire G3 Installation Manual page 13

Venting
Alternate Venting with optional
720SWK-M—Co-linear sidewall kit
The appliance may also be vented using the optional
720SWK-M—Co-linear sidewall kit—see installation
instructions supplied with the kit.
720SWK
720SWK-M
Terminal
Terminal
Min. 3'-0"
*Max. 10'-0"
If more than 10'-0" vertical
*
vent run, the vent plate
supplied on the appliance (with
restrictor) can be used. No
need to replace it.
NOTE
Depending of the length of the vertical vent run,
the AutoFire vent plate may need to be replaced
by the vent plate included with the 720SWK-M
terminal—see instructions provided with the
terminal.
3" min.
Bend
Radius
3" Liners
Concept
13