Valor AutoFire G3 Installation Manual page 21

Installation
6. Place the burned end of log G6 on top of the ember
bed and rests its other end on the embers as indi-
cated. Ensure the notch on the log is on top.
G4
G4
Log G6 installed
7. Place the burned end of log G5 on the notch of G6
and rests its other end on the embers.
G5
Log G5 installed
G6
G6
G4
G6
G5
8. Place log H7 resting its light part on G5 and its
forked end on the ember bed G4 under log G25. The
short end of the fork should be near the rear log G1.
G25
G4
G5
Log H7 installed
Fuel Beds
H7
H7
21