Valor AutoFire G3 Installation Manual page 24

Installation
4. Install G26 placing it over the left pin on
G11 and resting its other end left of the
embers' cavity.
G26
5.
right pin on G11 and resting its other
end right of the embers' cavity.
6. Place G14 burned end in the fl atter area on G4 ember
bed and the other end on embers, ensuring the notch
on G14 is at the top.
G4
24
G11
Install G24 placing it over the
G24
G11
G14
7. Place G15 on the notch of G14 and rest its other end on
the embers.
G15
Logs G14 and G15 installed
8. Place H20 on top of G15 and rest its other end on G4
ember bed under G26.
G4
G15
Fuel Beds
G14
H20