1. Manuals
  2. Brands
  3. Valor Manuals
  4. Indoor Fireplace
  5. 719
  6. Owner's manual

Valor 719 Owner's Manual

Inset live fuel effect
Hide thumbs Also See for 719:
Table of Contents

Advertisement

Quick Links

Download this manual
5109946/02
OWNER GUIDE
Model 719
(GC No. 32-032-53)
INSET LIVE FUEL EFFECT GAS FIRE
INCORPORATING THE
VALOR
CONTROL
with
Ultimate
or
Colourway
Firefront
THIS APPLIANCE IS FOR USE WITH NATURAL GAS (G20)
WHEN CONVERTED USING CONVERSION KIT NO. 0595221 THIS
APPLIANCE IS FOR USE WITH PROPANE GAS (G31)
THIS APPLIANCE IS SUITABLE ONLY FOR INSTALLATION IN THE UNITED
KINGDOM (GB) AND THE REPUBLIC OF IRELAND (IE).
We trust that these instructions give sufficient details to enable this appliance to be
installed and maintained satisfactorily. However, if further information is required, our
Valor Technical Helpline will be pleased to help.
Telephone 08706 061 065 (National call rates apply in the United Kingdom)
This guide is intended to help you care for your gas fire. Please read thoroughly before
using and keep for future reference
This guide to be left with the owner
© Valor Heating

Advertisement

Table of Contents
loading

Related Manuals for Valor 719

Summary of Contents for Valor 719

  • Page 1 We trust that these instructions give sufficient details to enable this appliance to be installed and maintained satisfactorily. However, if further information is required, our Valor Technical Helpline will be pleased to help. Telephone 08706 061 065 (National call rates apply in the United Kingdom) This guide is intended to help you care for your gas fire.
  • Page 2 BS EN ISO 9001 quality system accepted by the British Standards Institute. The Highest Standards Valor is a member of the Society of British Gas Industries which works to ensure high standards of safety, quality and performance. Careful Installation Valor is a CORGI registered company.

  • Page 3: Table Of Contents

    OWNER GUIDE LIST OF CONTENTS Section Page SAFETY APPLIANCE DIMENSIONS GAS CONSUMPTION OPERATING YOUR FIRE CLEANING Metal Parts Burner Ceramic fuel effect and Rear Wall FUEL BED REFITTING MAINTENANCE USEFUL TELEPHONE NUMBERS This gas fire is designed to meet the most stringent quality, performance and safety requirements to provide you with many years’...

  • Page 4: Safety

    OWNER GUIDE SAFETY IF YOU SMELL GAS DON’T SMOKE EXTINGUISH ALL NAKED FLAMES DON’T TURN ELECTRICAL SWITCHES ON OR OFF TURN OFF THE GAS SUPPLY AT THE METER OPEN DOORS AND WINDOWS TO GET RID OF THE GAS IMMEDIATELY CALL THE GAS EMERGENCY SERVICE – SEE YOUR LOCAL TELEPHONE DIRECTORY Do have the fire installed by a competent person.
  • Page 5 OWNER GUIDE Do always use a fireguard complying with BS 8423 for the protection of young children, the elderly or infirm. Do wait three minutes before attempting to relight if the fire is switched off or the flames are extinguished for any reason.(Your fire is fitted with a safety device that will automatically shut off the gas supply to the fire, if for any reason , the flame goes out) Do get advice about the suitability of any wall covering near your fire.

  • Page 6: Appliance Dimensions

    Has a minimum natural gas input of 2.7kW (Gross) Has a minimum natural gas output of 1.3kW Model 719 when converted using kit number 0595221 Has a maximum propane gas input of 6.1kW (Gross) Has a maximum propane gas output of 3.6kW Has a minimum propane gas input of 4.3kW (Gross)

  • Page 7: Operating Your Fire

    OWNER GUIDE OPERATING YOUR FIRE PLEASE NOTE When operating your fire for the first time, some vapours may be given off which may cause a slight odour and could possibly set off any smoke alarms in the immediate vicinity. These vapours are quite normal with new appliances. They are totally harmless and will disappear after a few hours use.
  • Page 8 OWNER GUIDE explained above. 3. If low heat is required, release the button. The button will automatically spring up to the low heat position shown in figure 2 (See note i). 4. For a higher heat level slide the button upwards. The burner flames and heat output will gradually increase until the button reaches the high heat position shown in figure 2.

  • Page 9: Cleaning

    OWNER GUIDE CLEANING To maintain the high performance and quality finish of your appliance, please follow these guidelines: Before attempting to clean the fire, please remember to turn off the fire and wait for the appliance to cool. The fire will retain heat for some time before cleaning can begin. If any pieces of debris are found in the firebox, have the chimney inspected before further use.

  • Page 10: Fuel Bed Refitting

    OWNER GUIDE FUEL BED REFITTING 1. Place the rear base coal in the firebox. It should rest on the ledges at the rear sides of the burner unit. When located gently move the rear base coal so that it is as far forward as possible.
  • Page 11 OWNER GUIDE 4. Place a type “B” coal between the front and rear base coals as shown in figure 7. The letter “B” should be upright. 5. Place a type “A” coal between the front and rear base coals with the letter “A”...

  • Page 12: Maintenance

    In the United Kingdom servicing can be carried out either by a Valor service engineer or a CORGI registered installer. If you require your fire to be serviced, please contact Valor Service on 08706 090 081 and quote the following details;...

  • Page 13: Useful Telephone Numbers

    OWNER GUIDE USEFUL TELEPHONE NUMBERS General advice about gas and your gas fire: VALOR TECHNICAL HELPLINE 08706 061 065. To report faults or arrange for your fire to be serviced: VALOR SERVICE 08706 090 081. For sales or product information: VALOR SALES 08706 061 067.

Table of Contents