Table of Contents
Advertisement
Installation
Driftwood Kit 739VDWK
Material required
• Driftwood Log Kit, which contains:
• 7 logs
• 3 pebbles
• 1 2-cup bag of embers
• Gloves, if desired
G11
G26
H20
G15
G4
G24
G14
Installation
Carefully unpack the kit. Note that each log has its own
number stamped on the bottom. Some logs have pegs
to help place them.
Install the logs as shown below.
1. Install G4 ember bed onto the burner, placing the
groove under the log on the burner's front top rail
as indicated.
G4
Ember bed G4 installed
2. Place embers, by hand, in the cavity in front of the
burner as indicated.
3. Place log G11 behind the burner on the fuel bed sup-
port and slide it forward until it touches the front
vertical tabs of the support. Slide the log to the right
so it rests against the pilot shield.
G11
Fuel Beds
G4
23
Advertisement
Table of Contents
