Valor AutoFire G3 Installation Manual page 27

Installation
4. Install G20 placing it over the left pin on G21 and
resting its other end left of the embers' cavity.
G20
5. Install G9 placing it over the right
pin on G21 and resting its other end
right of the embers' cavity.
6. Place G10's burned end in the fl atter area on G4 ember
bed and the other end on embers, ensuring the notch
on G10 is at the top.
G4
Log G10 installed
G21
G21
G9
G10
G10
7. Place G16 on the notch of G10 and rest its other end on
the embers.
G16
8. Insert H28, fork short end down, behind G20 and rest
it on G4 ember bed; rest its light end on G16.
G20
G4
G16
Log H28 installed
Fuel Beds
G10
H28
H28
27