Table of Contents
Advertisement
Installation Planning
This appliance may ONLY be installed in an existing unaltered, functioning solid-fuel burning fireplace with a
working flue and constructed of non-combustible material.
This appliance may be installed in outdoor, weather protected environments as defined in the GV60CKO
Outdoor Conversion Kit instruction manual.
DO NOT install into combustible construction. This appliance is NOT APPROVED for installation with a zero
clearance kit.
WARNING
HOT HEARTH / FLOOR! The hearth or floor
in front of the fireplace may become very
hot when the fireplace heats. Do not use
the hearth as a seat or shelf. Solid wood
flooring in front of the fireplace (if allowed)
may shrink during the heating season due
to heat.
WARNING
Some materials or items, although safe,
may discolor, shrink, warp, crack, peel, and
so on because of the heat produced by the
fireplace. Avoid placing candles, paintings,
photos, and other items sensitive to heat
around the fireplace.
(optional, sold separately)
Inner Front with Barrier Screen
(required, sold separately)
(optional, sold separately)
Gas insert does not require a hearth.
Combustible fl ooring/hearths allowed
provided level with or lower than base
Outer trim
Fret
739 fi replace
of insert.
Concept
Chimney Terminal
Cap
Flashing
2 x 3" approved
fl ex chimney liners
running full length
Existing unaltered,
functioning solid-fuel
burning fi replace &
chimney
11
Advertisement
Table of Contents
