Table of Contents
Advertisement
Installation
Remove Window
The window is held in place by four spring-loaded bolts,
two at the top and two at the bottom.
1. To remove the window, turn each bolt a quarter
turn to disengage the bolt pin.
2. Gently pull the bottom of the window outward and
unhook it from the fi rebox's top.
3. Set the window aside in a safe place to avoid dam-
age.
Install Fan (if used)
If the 755CFK—Circulating Fan Kit (blower) is to be
installed, we suggest that you do it now.
The fan cavity is accessible from the back of the fi rebox
to facilitate its installation. If the fan is retrofi tted after
the installation of the appliance, the burner module
will need to be removed. Therefore, we recommend
that, where possible, the fan be installed before the
appliance is fi tted into the cavity.
Refer to instructions provided with the 755CFK to
install the fan.
WARNING
NO ELECTRICAL CONNECTION ALLOWED
for any outdoor installation!
Window and Fan
fan
cavity
electrical
outlet
15
Advertisement
Table of Contents
