1.2.b Plumbing Diagrams (Water Source)
Plumbing diagrams are provided in this section as a planning guide to the sequence of equipment, valves,
and fittings.
The basic plumbing configurations for typical installations are shown.
l
l
If the installation does not closely follow any of the supplied plumbing diagrams, AquaCal
is available for installation advice and guidance.
Confirm water provided to the heat pump is clean and filtered.
l
It's important to use contractors familiar with geothermal applications when installing a
Water Source heat pump.
Single Water Source Heat Pump Configuration (Standard Pressures)
®
Technical Support
Page - 5