Pool Only, No Valves, Single Speed; Spa Only, No Valves, No Pump; Spa Only, No Valves, Pentair Vs - Aquacal Water Source WS03 Installation Manual

Pool Only, No Valves, Single Speed

When pressed, the "Pool/Spa" button will display with two choices.
1. Pool - With an initial timer set for 48 hours at 85° F.
2. Schedules

Spa Only, No Valves, No Pump

When pressed, the "Pool/Spa" button will display with two choices:
1. Spa - With an initial timer of 2 hours at 96° F (104° F with an installed OTA kit).
2. Schedules

Spa Only, No Valves, Pentair VS

When pressed, the "Pool/Spa" button will display with two choices.
1. Spa - With an initial timer of 2 hours at 96° F (104° F with an installed OTA kit).
2. Schedules
This preset configures the heat pump as
follows:
No valve actuators are configured.
l
A single speed circulation pump is
l
configured to use the relay "A" connection
point on the expansion board.
A pool schedule is configured (Everyday
l
from 8:00 am to 6:00 pm)
This preset configures the heat pump as
follows:
No valve actuators are configured.
l
No circulation pump is configured.
l
No schedules are configured.
l
This preset configures the heat pump as
follows:
No valve actuators are configured.
l
A Pentair (or Sta-Rite) variable speed
l
circulation pump is configured.
A pool schedule is configured (Everyday
l
from 8:00 am to 6:00 pm)
Page - 41