Schedule And Program Modes - Aquacal Water Source WS03 Installation Manual

USE ARROWS TO
3
PROGRAM TO EDIT
ENTER TO SELECT
6
1.6.k Schedule and Program Modes
Schedules can be deactivated temporarily as needed. Either globally through a schedule mode, or
individually by setting a group's program mode.
SCHEDULE
MODE
"AUTO"
"AWAY"
"OFF"
PROGRAM
MODE
"ON"
"PAUSED"
"OFF"
ENTER TO EDIT
4
SELECT "YES" TO
7
CLEAR PROGRAM
Description
The default mode. This allows schedules to
run normally.
This mode is generally used when the user is
away on vacation and doesn't want to
maintain a water temperature. The heat pump
will be deactivated while the rest of the
schedules (including filtration) are allowed to
continue.
This mode turns off all schedules. The
schedules resume when the schedule mode is
set to "AUTO" again. Please note - this will
also halt any connected circulation pump
activity. This option is not meant for long
term usage.
Description
A group's scheduled programs are set to
operate normally.
A group's scheduled programs will be
paused. The programs will automatically
resume the next scheduled day. No other
group's activities will be effected.
This mode turns off all schedule programs
for the group indefinitely. Programs resume
when the program mode is set to "ON" again.
USE ARROWS TO
5
"CLEAR"
MENU TO EXIT, PRESS
& HOLD TO STATUS
See "Set Schedule Mode to
"AUTO"" on the next page.
See "Set Schedule Mode to
"AWAY"" on the next page.
See "Set Schedule Mode to
"OFF"" on page 55.
See "Set Group Programs to
"ON"" on page 55.
See "Set Group Programs to
"PAUSED"" on page 56.
See "Set Group Programs to
"OFF"" on page 57.
Page - 53