Water Source WS10
Water Source WS03, WS05
SunPower SP05
1.2.f In-Line Chlorine Feeders
Place in-line chlorinators downstream from the heat pump and as low in elevation as possible.
If an erosion type feeder is used, it is recommended that a Hartford Loop be installed to protect internal heat
l
pump components.
A Hartford Loop is not required when using a Salt Chlorine Generator.
l
Avoid storing corrosive chemicals near the heat pump to minimize potential damage to the exterior of the heat
l
pump.
Heat Pump with Erosion Tablet Feeder and Hartford Loop
Page - 10