Using Shortcuts - Aquacal Water Source WS03 Installation Manual

1.6.l Using Shortcuts
The shortcuts menu provides quick access to model specific options and features. The following outlines
some of these options.
Group Access
As a group is created, a shortcut automatically appears in the shortcuts menu. The user can activate
the group by shortcut and will be asked how long to operate that group.
Multiple group shortcuts can operate at the same time. The time remaining for each group to operate will
l
appear on the status screen.
After the group shortcut timer expires, the heat pump group will resume its normally scheduled activity.
l
To cancel the group shortcut's operation before its timer expires, go to the shortcut menu, select it, and
l
choose "STOP".
See "Using a Group Shortcut" below.
l
See "Stopping a Group Shortcut" on the facing page.
l
PLEASE NOTE:
The Spa and Pool groups (if applicable) will not appear in the shortcuts menu. Use the
schedules or the Pool / Spa button to activate those groups.
Schedule Mode
There are three modes that can be set when running schedules.
"AUTO" - The default mode. This allows schedules to run normally.
l
"AWAY" - This mode is generally used when the user is away on vacation and doesn't want to maintain a
l
water temperature. The heat pump will be deactivated while the rest of the schedules (including filtration)
are allowed to continue.
"OFF" - This mode turns off all schedules. The schedules resume when the schedule mode is set to
l
"AUTO" again.
(See " Schedule and Program Modes " on page 53 for more information.)
l
Service Mode
This mode will deactivate the heat pump as well as all equipment connected to the heat pump.
(See " Service Mode " on page 83 for more information.)
l
Using a Group Shortcut
In this example, a user activates a group that was previously created called "FILTRATION".
IF UNIT IS ASLEEP,
SWIPE TO WAKE UP
Page - 58
PRESS MENU
A
BUTTON
USE ARROWS TO
B
"SHORTCUTS"