Table Of Contents - Aquacal Water Source WS03 Installation Manual

Contacting AquaCal AutoPilot, Inc.
Safety
1 - Installation
1.1 Positioning Equipment
1.2 Plumbing
1.2.a Plumbing Requirements
1.2.b Plumbing Diagrams (Water Source)
1.2.c Plumbing Diagrams (SunPower)
1.2.d Maintaining Ability to Winterize
1.2.e Water Connections to Heat Pump
1.2.f In-Line Chlorine Feeders
1.2.g Water Flow Rates
1.2.h Geothermal Menus
1.3 Electrical
1.3.a Electrical Requirements
1.3.b Incoming Power Access Holes
1.3.c Access Panels
1.3.d Verifying Transformer Setting (Select Units)
1.3.e Schematic Location
1.3.f Connecting and Configuring Actuator and Relay-Controlled Devices
1.4 Connecting an External Controller (Optional)
1.4.a PoolSync®
1.4.b SMART Controllers
1.4.c 2-wire Controllers (Pool-Spa)
1.4.d 3-wire Controllers (Pool-Off-Spa)
1.5 Connecting Multiple Heat Pumps (Optional)
1.5.a Connecting Heat Pumps
1.5.b Configure Primary Heat Pump
1.5.c Configure Secondary Heat Pumps
1.6 Programming
1.6.a Setting Date and Time
1.6.b Setting Date and Time Format
1.6.c Selecting Celsius or Fahrenheit
1.6.d Set a desired temperature (setpoint) for the Heat Pump to activate
1.6.e Setting Entry Code Option
1.6.f Disabling Entry Code Option
1.6.g Site Configuration Presets (Optional)
1.6.h Manually Configure Devices (Optional)
h.1 Manually Configure Relays
h.2 Deleting Equipment
1.6.i Configuring Groups
i.1 Create a Group
i.2 Edit a Group
i.3 Delete a Group
1.6.j Configuring Schedules

Table of Contents

i
1
1
3
3
4
4
5
8
9
9
10
11
12
13
13
14
15
16
17
17
18
18
20
23
24
25
26
27
27
29
29
30
31
32
32
33
35
43
44
45
46
46
48
49
49