Manually Configure Relays - Aquacal Water Source WS03 Installation Manual

h.1 Manually Configure Relays
In this example, a relay controlled light is to be configured. The heat pump supports generic lights (Off -
On) as well as color changing lights including Pentair, Jandy, Hayward, PACFAB SAM, and SR SMITH.
In the following example a generic pool light connected to the control board on relay "C"
is configured to be used.
IF UNIT IS ASLEEP,
SWIPE TO WAKE UP
PRESS "ENTER"
C
USE ARROWS TO
3
"LIGHTS"
ENTER TO SAVE
6
USE ARROWS TO
9
SELECT DEVICE'S PORT
MENU TO EXIT, PRESS
& HOLD TO STATUS
Page - 44
PRESS MENU
A
BUTTON
USE ARROWS TO MENU
1
"NEW EQUIPMENT"
ENTER TO SELECT
4
USE ARROWS TO
7
LIGHT TYPE
ENTER TO SELECT
10
USE ARROWS TO
B
"EQUIPMENT"
ENTER TO SELECT
2
USE ARROWS TO MENU
5
DEVICE NAME
ENTER TO SAVE
8
PRESS BUTTON UNDER
11
"YES" TO SAVE