Deleting Equipment - Aquacal Water Source WS03 Installation Manual

The configured device will now be
l
available for insertion into a group.
See "Create a Group" on the next
l
page.
See "Edit a Group" on page 48.
l
h.2 Deleting Equipment
Configurations for equipment can be removed from the system.
These configurations will automatically be deleted from any group upon removal.
NOTICE
Removing the circulation pump from the system can prevent the heat pump from operating.
l
Removing the circulation pump from the system can prevent proper filtration of the pool. Confirm proper water
l
circulation is maintained.
In the following example a pool light device's configuration is removed from the system.
The device will also be removed from all groups.
IF UNIT IS ASLEEP,
SWIPE TO WAKE UP
PRESS "ENTER"
C
USE ARROWS TO
3
DEVICE TO REMOVE
MENU TO EXIT, PRESS
& HOLD TO STATUS
Failure to heed the following may result in damage to equipment.
PRESS MENU
A
BUTTON
USE ARROWS TO MENU
1
"DELETE EQUIPMENT"
ENTER TO SELECT
4
USE ARROWS TO
B
"EQUIPMENT"
PRESS ENTER TO EDIT
2
PRESS BUTTON UNDER
5
"YES" TO CONFIRM
Page - 45