Pool / Spa, No Valves, Pentair Vs; Pool / Spa, No Valves, Hayward Vs; Pool / Spa, No Valves, Jandy Vs - Aquacal Water Source WS03 Installation Manual

Pool / Spa, No Valves, Pentair VS

When pressed, the "Pool/Spa" button will display with three choices.
1. Pool - With an initial timer set for 48 hours at 85° F.
2. Spa - With an initial timer of 2 hours at 96° F (104° F with an installed OTA kit).
3. Schedules

Pool / Spa, No Valves, Hayward VS

When pressed, the "Pool/Spa" button will display with three choices.
1. Pool - With an initial timer set for 48 hours at 85° F.
2. Spa - With an initial timer of 2 hours at 96° F (104° F with an installed OTA kit).
3. Schedules

Pool / Spa, No Valves, Jandy VS

When pressed, the "Pool/Spa" button will display with three choices.
1. Pool - With an initial timer set for 48 hours at 85° F.
2. Spa - With an initial timer of 2 hours at 96° F (104° F with an installed OTA kit).
3. Schedules
This preset configures the heat pump as
follows:
No valve actuator is configured.
l
A Pentair (or Sta-Rite) variable speed
l
circulation pump is configured.
A pool schedule is configured (Everyday
l
from 8:00 am to 6:00 pm)
This preset configures the heat pump as
follows:
No valve actuator is configured.
l
A Hayward variable speed circulation
l
pump is configured.
A pool schedule is configured (Everyday
l
from 8:00 am to 6:00 pm)
This preset configures the heat pump as
follows:
No valve actuator is configured.
l
A Jandy variable speed circulation pump
l
is configured.
A pool schedule is configured (Everyday
l
from 8:00 am to 6:00 pm)
Page - 37