PRESS "ENTER"
C
USE ARROWS TO
1
"MULTI-UNIT"
ENTER TO EDIT
4
USE ARROWS TO
7
CHANGE ADDRESS
PLEASE NOTE:
This action will wipe all previous settings
in favor of the new configuration. This
includes external controller settings,
optional device settings, groups,
equipment, schedules, and site specific
settings. Additional site specific settings
may need to be put in place.
Page - 28
USE ARROWS TO
D
"ADVANCED"
PRESS ENTER TO EDIT
2
USE ARROWS TO
5
"SECONDARY"
ENTER TO SAVE
8
The system will restart. The heat pump
will now need to be controlled by the
primary heat pump.
PRESS "ENTER"
E
USE ARROWS TO
3
"MULTI-UNIT MODE"
ENTER TO SAVE
6
CONFIRM OK TO CLEAR
9
EXISTING SETUPS