Available Accessories - Aquacal Water Source WS03 Installation Manual

HEAT EXCHANGER
TYPE
Titanium ThermoLink
Table 3 - Temperature Chart (Sun Power)
PLEASE NOTE -
Temperature differences are based on pool and source water temperatures of 69° to 75° F.
l
(20.5° to 23.8° C)
l For water temperatures outside this range, contact AquaCal
AquaCal AutoPilot, Inc." on page 1.

2.2 Available Accessories

Accessories may be purchased through an authorized dealer of AquaCal
Bypass Valve Kit (# STK0135)
When high flow rates are outside recommended
l
specifications, please use this kit or an alternative bypass
valve system.
This kit can be used to control excessive water flow
l
through the heat pump. It provides automatic flow
adjustments for most applications.
Grid Flow Switch (# 0040S)
Used for automatic pool/spa thermostat switching.
l
This kit is not to be used on applications exceeding 50 PSI
l
(345 kPa).
MODEL
®
2° to 8° F
SP05
(1.1° C to 4.4° C)
SOURCE-SIDE
3° to 6° F
(1.7° C to 3.3° C)
® . See "Contacting
® products.
SPA-SIDE
Page - 63