SunPower Heat Pump Configuration
1.2.d Maintaining Ability to Winterize
Do not use glue on the threaded portion of the equipment's unions. A glued-in-place union will prevent the
equipment from being properly winterized.
1.2.e Water Connections to Heat Pump
Heat Pump union sizes are specified on diagrams.
l
Connections to site plumbing are made via PVC solvent cement to the female slip socket of the plumbing
l
unions.
High-pressure units use joint compound on threaded copper connections.
l
l
Plumbing unions are available from AquaCal
NOTICE
Do not use glue on the threaded portion of the equipment's unions. A glued-in-place union will prevent the
l
equipment from being properly winterized.
®
.
Failure to heed the following may result in damage to equipment.
Page - 9