Programming; Setting Date And Time - Aquacal Water Source WS03 Installation Manual

1.6 Programming

1.6.a Setting Date and Time
The date and time are required in order to allow schedules to operate properly.
Set the heat pump's date and time using the following steps.
PLEASE NOTE:
®
If a PoolSync
and maintained.
IF UNIT IS ASLEEP,
SWIPE TO WAKE UP
PRESS "ENTER"
C
USE ARROWS TO
3
CHANGE
IN THIS SECTION:
1.6.a Setting Date and Time
1.6.b Setting Date and Time Format
1.6.c Selecting Celsius or Fahrenheit
1.6.d Set a desired temperature (setpoint) for the Heat Pump to activate
1.6.e Setting Entry Code Option
1.6.f Disabling Entry Code Option
1.6.g Site Configuration Presets (Optional)
1.6.h Manually Configure Devices (Optional)
h.1 Manually Configure Relays
h.2 Deleting Equipment
1.6.i Configuring Groups
i.1 Create a Group
i.2 Edit a Group
i.3 Delete a Group
1.6.j Configuring Schedules
j.1 Create a Schedule
j.2 Edit a Schedule
j.3 Delete a Schedule
1.6.k Schedule and Program Modes
1.6.l Using Shortcuts
device is attached and in-use, the time and date will automatically be set
PRESS MENU
A
USE ARROWS TO MENU
1
"TIME / DATE"
ENTER TO SAVE
4
BUTTON
USE ARROWS TO
B
"SYSTEM"
PRESS ENTER, ITEM TO
2
CHANGE WILL BLINK
MENU TO EXIT, PRESS
& HOLD TO STATUS
29
30
31
32
32
33
35
43
44
45
46
46
48
49
49
50
51
52
53
58
Page - 29