DAKOTA ULTRASONICS CMX DL Operation Manual page 88

Dakota Ultrasonics
3)
Use the LEFT and RIGHT arrow keys to toggle the DIFFERENTIAL on. A
value will appear to the right of DIFFERENTIAL.
4)
Continue on to the next section "Setting the Differential Value".
1) Assuming DIFFERENTIAL has been enabled and a value is being displayed
to the right of the DIFFERENTIAL label, press the ENTER key to display the
Digits Edit Box.
2) Press the UP and DOWN arrow keys to scroll the highlighted value.
3)
Press the LEFT and RIGHT arrow keys to scroll the digit locations.
4)
Repeat steps 2 & 3 until the DIFFERENTIAL value is correctly displayed.
5)
Press the OK key to set the DIFFERENTIAL value and return to the menu
screen.
6)
Finally, press the MEAS key to return to the measurement screen and begin
taking readings.
1.800.544.2843
Setting the Differential Value
86
www.calcert.com
15
10 20
5 25
0 30
sales@calcert.com